Perforated Cable Tray Supplier & Exporter in Qatar
Superfab Inc. is a Perforated Cable Tray supplier and exporter to Qatar, manufacturing in Mumbai, India and shipping to projects in Doha, Lusail, Ras Laffan, Mesaieed, Al Wakrah and Umm Salal.
Our perforated cable trays are one-piece trays with a uniform slot pattern for ventilation, drainage and cable-tie fixing, made in six flange types (SIP1–SIP6), 50–1200 mm wide, 15–150 mm high and 1.0–3.0 mm thick, with bends, tees, risers, reducers and covers in the same finish.
Qatar's demand is driven by the North Field LNG expansion at Ras Laffan, petrochemical and industrial projects at Mesaieed, utilities and water projects, and continuing commercial and infrastructure development in Doha and Lusail. In Qatar, perforated trays are most often specified for instrumentation and control routes at Ras Laffan and Mesaieed, carrying control, instrumentation and light power cables that can be tied neatly through the slots.
Orders for Qatar are packed for sea freight and shipped from Nhava Sheva (JNPT), Mumbai to Hamad Port near Doha. Commercial invoice, packing list and certificate of origin are prepared for each shipment.
Need a price for Perforated Cable Trays in Qatar? +91 98208 02872 Request a Quote
Perforated Cable Trays for Qatar's Industries
| Sector | Key areas in Qatar | Typical perforated cable tray routes |
|---|---|---|
| LNG & gas processing | Ras Laffan | Process-area power, control and instrumentation cables |
| Petrochemicals & industry | Mesaieed | Plant power distribution and utility cabling |
| Commercial & mixed-use | Doha (West Bay), Lusail | Risers, basements and MEP services |
| Utilities & water | Umm Al Houl, Ras Abu Fontas | Power-plant and pump-station cable routes |
| Infrastructure & transport | Doha Metro, Hamad Port | Station, depot and port-yard cabling |
Choosing the Right Perforated Cable Tray Finish for Qatar
Qatar's heat, humidity, UV and salty coastal air are hard on steel, so LNG and industrial projects usually specify hot-dip galvanised trays outdoors and SS 316 or aluminium in coastal and process areas. For perforated cable trays, we generally recommend pre-galvanised SIP1/SIP2 trays for indoor control and instrumentation runs, hot-dip galvanised trays for outdoor and utility areas, and SS 304 / SS 316 or aluminium where chemicals, wash-downs or coastal air are present. Share your site conditions and our team will confirm the material, thickness and finish before quoting.
How We Supply Perforated Cable Trays to Qatar
- Send your requirement – tray type, width × height × thickness, finish, quantity in metres and the fittings list, or your BOQ / drawing.
- Technical check & quotation – we confirm sizes, part numbers and finish, and send a quotation.
- Manufacturing in Mumbai – trays, fittings and covers are made to the approved sizes and inspected before dispatch.
- Export packing & shipment – packed for sea freight and shipped from Nhava Sheva (JNPT), Mumbai to Hamad Port.
Perforated Cable Tray Types Exported to Qatar
Perforated Cable Trays – Technical Specifications
| Flange types | SIP1 straight, SIP2 inside, SIP3 outside, SIP4 return inside, SIP5 return outside, SIP6 vertical slots |
|---|---|
| Material / finish | Pre-galvanised, hot-dip galvanised, aluminium, powder coated, SS 304, SS 316 |
| Width | 50 mm to 1200 mm |
| Height | 15 mm to 150 mm |
| Thickness | 1.0 / 1.2 / 1.6 / 2.0 / 2.5 / 3.0 mm |
| Length | 2500 mm or 3000 mm; bends in 300–1200 mm radius |
Sizes above are standard catalogue ranges; non-standard sizes are made to drawing. Download the catalogue for part numbering.
Get a quote for Perforated Cable Trays in Qatar
Share your tray size, finish and quantity. We supply across India and export worldwide.
Perforated Cable Trays in Qatar – Frequently Asked Questions
Do you export Perforated Cable Trays to Qatar?
Yes. Superfab Inc. manufactures Perforated Cable Trays in Mumbai, India and exports them to EPC contractors, panel builders and end users in Qatar, including Doha, Lusail, Ras Laffan, Mesaieed, Al Wakrah and Umm Salal.
How are Perforated Cable Trays shipped to Qatar?
Orders for Qatar are packed for sea freight and shipped from Nhava Sheva (JNPT), Mumbai to Hamad Port near Doha. Commercial invoice, packing list and certificate of origin are prepared for each shipment.
Which Perforated Cable Tray finish is best for projects in Qatar?
Qatar's heat, humidity, UV and salty coastal air are hard on steel, so LNG and industrial projects usually specify hot-dip galvanised trays outdoors and SS 316 or aluminium in coastal and process areas. For perforated cable trays we generally recommend pre-galvanised SIP1/SIP2 trays for indoor control and instrumentation runs, hot-dip galvanised trays for outdoor and utility areas, and SS 304 / SS 316 or aluminium where chemicals, wash-downs or coastal air are present.
What is the difference between SIP1 and SIP2 perforated trays?
SIP1 has a straight flange, while SIP2 has a 15 mm inside flange that stiffens the side wall. SIP3 to SIP5 add outside or return flanges, and SIP6 adds vertical slots.
What sizes of perforated cable tray do you make?
Standard widths run from 50 mm to 1200 mm, heights from 15 mm to 150 mm and thickness from 1.0 mm to 3.0 mm, in 2500 mm or 3000 mm lengths.
Which finish should I choose for outdoor use?
Hot-dip galvanised or stainless steel perforated trays suit outdoor, coastal and chemical areas; pre-galvanised trays are normally used indoors.